$120.00 – $400.00

• New and improved Gen2.1 Disaster Prevention Kit
• Safeguards fuel injectors, rails, lines, and tank from CP4 debris
• Thoroughly validated and proven to work in real-world testing
• Return filter isolates CP4 debris before it goes on to the tank
• Gen2.1 billet filter head accepts standard spin-on fuel filters
• Can extend the range of a truck during a CP4 failure
• CARB Compliant (EO# D-756-6)
• Made in the USA

Call us for installed price quote: 541-459-8939. 

#Ford67CP4

 #SEMA2022

SuperSteer RV products has answered Mercedes-Benz customers’ requests for improved ride and handling of dual-rear-wheel  2WD Sprinter 3500 camper vans and motorhomes with the new SS-480-1 rear suspension package that results in “sports-car-like” ride and handling.

The SuperSteer M-B Sprinter Handling Package (SS-480-1) is priced at $1538.88, and  includes SS88-1889 rear shocks, SS110 Anti-sway Bar, and SS701 Rear Trac Bar. All of the rear axle components are direct bolt-on replacements using existing factory mounting holes. The kit comes complete with all mounting hardware and detailed instructions. 

This kit significantly reduces the continuing rocking motion and instability felt after exiting parking lots and gas stations or driving through off-camber sections of roadway.

Call our service desk for installation quote: 541-459-8939. 

#SuperSteer #ClassC #RVSuspension #RVhandling

Factory Power Stroke 6.4L up-pipes are prone to failure due to age and heat cycling causing leaking exhaust and slower turbo spool. BD's larger diameter 304 stainless steel mandrel bent up-pipes with internally shielded expansion bellows, are designed to minimize restriction to the turbo and improve exhaust velocity and turbo response time.

Call us for installed price quote: 541-459-8939. 

#Ford64uppipes #Ford64

#Powerstrokeuppipes #SEMA2022

The Sinister Diesel 320 Amp Alternators uses brand new OEM components such as the Stator, Rotor, Rectifier, and Regulator to give our customers peace of mind to match our stand of quality. Features an upgrade High Output Regulator and Upgraded High-Temp bearings with a cast aluminum Chassis, Powder Coated in our Signature Sinister Blue.

Call us for installed price quote: 541-459-8939. 

#Cumminshotalternator #Ram67alternator

#SEMA2022

Cummins has a trust-worthy reputation for rock-solid durability and worry-free performance. The latest generation 6.7 L Cummins reinforces that reputation with a CGI block, stronger crankshaft, redesigned connecting rods, and 2,000 bar fuel system. The one chink in the newly-revised armor is the Bosch CP4.2 high pressure pump. In contrast to Cummins, it has a bad reputation for premature failure and destroying the entire high-pressure fuel system with fine metal debris, when it does. At the heart of the S&S Diesel Motorsport No Tuning Required 2019+ RAM CP3 Conversion Kit is a brand-new Bosch CP3NH base pump that is internally modified for improved durability, high speed performance, and tuning-free rail pressure control. The ultra-reliable CP3 is combined with OE-grade components for a truly refined kit that looks factory. MSRP: From $2,700. Call us  for installed price quote: 541-459-8939. #CumminsCP3 #SSDieselConversion  #Cummins67CP3

The SuperSteer® SS110 anti-sway bar is heat treated, offering a stronger alternative to the traditional sway bar upgrade for Class C motrohomes on the Sprinter 3500 chassis. When heat is applied during manufacturing, the steel hardens and becomes stronger. At 1 1/2" diameter, it is larger than the stock sway bar. Traditionally, for every 1/8" sway bar diameter size, you gain 30% increase in strength. Heat treated sway bars provide approximately 60% increase for every 1/8". A huge improvement for such a small increase. The sway bar will help eliminate sway and body roll in your RV. Mobile Diesel Service is an authorized SuperSteer installer. Call us  for installed price quote: 541-459-8939. #SuperSteerSS451 #ClassCbodylean #ClassCswaybar

#motorhomeswaybar

Give your 6.7L Cummins a big HP pop without any extra modifications with this BD Diesel drop-in  CP3 pump and Common Rail injectors that are far from stock performance levels. CP3 injection pump with 12mm stroke camshaft is engineered with modified plungers to produce up to 5.25 LPM versus the stock 3.05LPM, pushing the 6.7L to 700hp. (Requires about 8hrs install time.) Kit includes matching injectors.

MSRP: $3,775  Call Mobile Diesel Service  for installed price quote: 541-459-8939. #CumminsCP3  #67Cumminspower

 New! Fleece Performance Stainless Steel Turbo Stud kit for S-300 and S-400 turbos. Our studs are produced in the USA from aged 630 stainless steel and feature a 4mm internal hex head for easy installation. Impervious to rust and corrosion, these studs not only look good, but allow for higher clamping force. Mobile Diesel Service is your one-stop diesel engine performance shop. Call us for price quote: 541-459-8939. MSRP: $52.44

#BestDieselTruckRepair

#DieselPickupRepairRoseburg

#Top5DieselRepairShop

#BestOregonDieselShop

The Titanium Signature Series diesel fuel system was engineered by FASS Diesel Fuel Systems to be the top performing, longest lasting and most reliable aftermarket filtration system in the diesel industry.    A Titanium Signature Series fuel system also offers advanced filtration benefits that will help protect your Powerstroke’s injection systems, effectively extending the life of both your Injection Pump and Injectors. MSRP: $849.  Mobile Diesel Service repairs all makes/models of diesel trucks and RVs. 

Frantz Filters now offers an expanded line of Duramax, Cummins and Powerstroke Bypass Oil Filter Kits. 

These custom designed kits  include the Ford Powerstroke 6.7L, 7.3L, and dual-model kit for the 6.0L/6.4L Powerstroke, and three separate 6.6L Duramax/GMC kits for years ’01–’16, ’17–’19 and the current ’20–’21. 

The Frantz bypass filter kit filters engine oil 10x finer than an OEM filter, down to 2 microns, and it

installs in under an hour.  

www.frantzfilters.com

Call us for installed price quote: 541-459-8939. 

#dieselbypassfilterkit #Frantzdieselfilter

#cleanerdieseloil

Tired of battling the cold yet? Fleece Performance Engineering's all-new heated fuel filter kit for the LML mounts in the factory fuel filter location, integrates the WIF sensor, and will give you the confidence you need when temperatures drop! The filter base eliminates the factory filter housing and fuel primer bulb and is intended for use with a positive pressure lift pump such as our PowerFlo lift pump or alternative frame mounted pump.  Call us for installed price quote: 541-459-8939. 

#DMAXLML #Heatedfuelfilter #Powerflow  #Fleecefuelfilter

VENOM CP3 CONVERSION KIT C/W STANDARD PUMP - CHEVY/GMC DURAMAX 6.6L 2011-2016 2500/3500 (PN:1050496)  

We are excited to introduce the BD Diesel LML Duramax (2011-2016) CP3 Conversion Kit, a reliable and EPA compliant solution for backdating injection pumps from the problematic CP4 to the proven CP3 pump! BD's LML Duramax CP3 Conversion Kit offers a range of features that will benefit you and enhance engine performance:

1. Replaces CP4 injection pump with the reliable CP3 pump.
2. Utilizes the LMM Duramax Style CP3 pump, known for its proven performance.
3. No tuning required on stock engines for operation, saving time and effort.
4. EPA compliant, ensuring that you can maintain compliance with emissions regulations.
5. No core charge, making the transition smoother and more cost-effective.

Call us for installed price quote: 541-459-8939. 

#DuramaxCP4fix  #DuramaxCP3conversion #Duramax66fuelpump